The Multi-blade Panel Saw has been devised for executing cuts and multiple grooves on boards, also with veneered surfaces and coated with various materials.
It is a machine with an high efficiency, which is used with excellent results for the production of prefinished parquet, walls and ceilings, doors for furniture, strips for profiles, staves for beds, MDF frames and so on.
It is realized in various powers and with working width capacity of 80, 130, 160, 190, 250 o 310 cm, the MLS can be supplied with special equipment, according to the production requirements of the customer, and also in the version TR, for transversal grooves and cuts.
The machine features a precise and compact tubular steel structure, which gives to the unit an high sturdiness and, moreover, it is equipped with: 
- regulation system of the cutting and grooving depth, without changing the working table height with respect at the floor;
- advancement group of the workpieces through rollers, with opening by a pneumatic cylinder for permitting the tools change on the spindle;
- electronic adjustment of the advancement speed;
- regulation system of the passage opening among the rollers of the advancement group, according to the panels thickness;
- safety system for panels thickness control;
- tool-holder spindle of hardened and ground steel, with anti-rotation locking, so to make easier the tools change operations; it is supported at one extremity by a double fixed support and at the other one by a sliding support, which can be removed for the setting / disassembling of the tools;
- interchangeable working table, which assures the perfect execution of the cut without vibrations;
- movable and conveying pressure wheels over the spindle, for keeping the workpiece pressed against the working table, during the cutting phase; 
- suction hoods, for permitting an easier evacuation of the chip from the cutting area.




MLS 130

MLS 160P

MLS 190P

MLS 250P

MLS 310P

Spindle motorization

from 11 to 22 Kw

from 15 to 55 Kw

from 22 to 55 Kw

from 30 to 90 Kw

from 30 to 90 Kw

Toolholder spindle dimensions

60 x 810 mm

80 x 1310 mm

80 x 1610 mm

80 x 1910 mm

80 x 2510 mm

80 x 3110 mm

Rotation speed

4500 rpm

4000 rpm

3000 rpm

Advancement speed

da 3 a 45 m/min'

Working table height

1120 mm

1120 mm

1120 mm

1120 mm

Max. tools diameter

230 mm

280 mm

Projection of the tools from the working table, adjustable

from 32 to 52 mm with tools 230 mm max.

from 42 to 62 mm with tools 280 mm max.

from 42 to 62 mm with tools 280 mm max

from 40 to 60 mm with tools 280 mm max

Projection of the tools without the working table, adjustable

from 42 to 62 mm with tools 230 mm max.

from 52 to 72 mm with tools 280 mm max.

from 52 to 72 mm with tools 280 mm max.

from 50 to 70 mm with tools 280 mm max

Max. milling depth

12 mm with mills 150 mm

22 mm with mills 200 mm

22 mm with mills 200 mm

20 mm with mills 200 mm

Max. workpiece width

800 mm

1300 mm

1600 mm

1900 mm

2500 mm

3100 mm

Min. workpiece length

380 mm

470 mm

500 mm

520 mm

Max. workpiece thickness

50 mm

60 mm

60 mm

80 mm

Machine dimensions

1520x1270 x1500h mm

2150x1450 x1750h mm

2500x1900 x1900h mm

2760x1900 x1900h mm

3500x1740 x1930h mm

4200x1740 x1930h mm

Machine weight

900 Kg. ca.

1500 Kg. ca.

2100 Kg. ca.

2400 Kg. ca.

4300 Kg. ca.

4500 Kg. ca.

On request:
- version TR: with advancement group through shutters, for transversal multiple grooving and cutting (i.e. for parquet strips)
- version P: with more powerful motor, spindle with 2 tangs and further central support with automatic locking, for harder workings
- version L: with shorter distance between the rollers, for cutting short pieces
- version r: with radial advancement group, for cutting bent panels (staves for beds)
- version 2R: with side fences passing between the rollers, for guiding the workpieces when they are already trimmed on size (i.e. for doors for kitchen furniture)
- version 2rr: with side fences passing between the rollers not interfering on the tools, for guiding pieces to be milled in several passages (min. workpieces thickness 6 mm)
- version 2rr +2cv: with pair of ejector rollers, pair of side fences not interfering on the tools and pair of vertical motors for joints (i.e. for panels for walls and ceilings)
- further central support with automatic blocking (p)
- pair of ejector rollers at output of the pieces, for eventual automatic stacker.
- input table with adjustable fences, for manual loading of the short workpieces
- output table, for manual unloading of the short worked pieces.
- pushing wheel on side fence.
- pressure wheel with groove, for the production of strips of width inferior to 45 mm
- double row of pressure wheels (pd), for cutting short pieces.
- pressure roller over the spindle, with copy function.
- special drive system, for panels with out of tolerance thickness.
- alignment device of the workpieces through tracer laser ray .
- motorized opening of the workpieces passage of the advancement group, according to the panels thickness.

Attachments and tools:
- MUR: revolving tools magazine, for those who must often change the distance between the grooves or the cuts to be obtained
- spacer rings: for spacing the tools to be set up on the spindle.