 |
 
|
|
|
 |
The Multi-rip Saw TR has been devised for executing cuts and multiple grooves on strips, also with veneered surfaces and coated with various materials and it can be used, for example, for the production of
prefinished parquet.
It is a machine with an high efficiency,till 30 pieces/minute
of productivity, which is realized in various powers and with working width capacities of 130 and 160 cm, besides to be supplied with special equipments, according to the production requirements of the
customer.
|
The MLS TR features a precise and compact tubular steel structure, which gives to it an high sturdiness and, moreover, it is equipped with:
- regulation system of the cutting and grooving depth, without changing the working table height with respect to the floor;
- advancement group of the workpieces through shutters, with opening by a pneumatic cylinder so to permit the tools change on the spindle;
- electronic adjustment of the advancement speed;
- workpieces input system through motorized belts and lifting rods
- rear output pieces group through motorized belts;
- opening regulation system of the workpieces passage through the advancement group, according to the panels thickness;
- safety system for panels thickness control;
- tool-holder spindle of hardened and round steel, with anti-rotation locking, so to make easier the tools change operations; it is supported on one extremity by a double fixed support and on the other one by a sliding support, which can be removed for the setting / disassembling of the tools;
- interchangeable working table, which assures the perfect execution of the cut without vibrations;
- suction inlet, for permitting an easier evacuation of the chip from the cutting area.
|
TECHNICAL DATA of the STANDARD MODELS
|
MLS 130 TR
|
|
Spindle motorization
|
from 15 Kw
|
from 22 Kw
|
Tool-holder spindle dimensions
|
Ø 80 x 1310 mm
|
Ø 80 x 1610 mm
|
Spinde speed
|
4000 rpm
|
Advancement speed
|
da 5 a 30 m/min' (up to 30
pieces/minute of productivity)
|
Working table height
|
990 mm
|
990 mm
|
Max. tools diameter
|
275 mm
|
275 mm
|
Projection of the tools from the working table, adjustable
…
|
from 27 to 47 mm with tools Ø
250 mm
or from 40
to 60 mm with tools Ø 275 mm max.
|
from 27 to 47 mm with tools
Ø 250 mm
or from 40
to 60 mm with tools Ø 275 mm max.
|
Max. milling depth
|
12 mm with mills Ø 180 mm
22 mm with mills Ø 200 mm
|
12 mm with mills Ø 180 mm
22 mm with mills Ø 200 mm
|
Max. workpiece width
|
350 mm
|
350 mm
|
Min. workpiece width
|
60 mm
|
60 mm
|
Max. workpiece length
|
1300 mm
|
1600 mm
|
Min. workpiece length
|
300 mm
|
300 mm
|
Max. workpiece thickness
|
50 mm
|
Machine dimensions
|
2100x2260x1500 h mm
|
2400x2260x1500 h mm
|
Machine weight
|
1850 Kg. approx.
|
2100 Kg. approx.
|
|
Attachments and tools:
- MUR: revolving tools magazine, for those who must often change the distance between the grooves or the cuts to be obtained.
- spacer rings: for spacing the tools to be set up on the
spindle.
|
|
|
|
|
|
